C02 Absorbant Keg Filling Adapter
Designed by rebreather expert Tony Land, and manufactured and
assembled by Explorer Technology, SorbPour is the ultimate device to manage
heavy C02 absorbent containers and get a precise scrubber canister fill.
SorbPour uses an Iris opening that allows you to meter
the amount of sorb flow coming from the container.
To use SorbPour, first find a shelf where you can place your
sorb container upside down with the opening accessible. Secure the container so it will not fall off
the shelf as you use it. A slight 10 degree forward tilt would be helpful (but
not necessary). Once you have your space set up install Sorbpour on to your
container as follows.
Remove cap from sorb keg.
Screw Sorbpour on to the keg opening. When the adaptor is completely
snug, turn the valve so the lever faces your desired direction. (Most usually
Carefully place your keg back on the shelf and you are ready to
start filling. Follow your rebreather’s manufactures specifications for the type of
absorbent and amount of fill for your scrubber.
This is not an
airtight valve, so please do not store absorbent long term with this on.
Remember that sorb can dry out if left unsealed, and the moisture content of
the canister can be affected. If you will not be using your absorbent for
a while, we suggest you remove and cap your keg.
Includes: Bottom Cap
Grey, Red, standard price
Black, Fuschia, Green, Yellow, White (add $5.00)
Note: Rainbow is a random color scheme, no two units are alike.
Note: Orders are filled in the order they are received. You will be notified when your order ships.
Note: As of 7/14/20 orders are now running 1-2 weeks before shipping. If we can get it out faster we will. Your patience is appreciated.
Note: we reserve the right to change shipping from UPS to USPS.
Book your Rebreather Adventure with Tony Land in Grand Cayman at: DiveTech